The following frames are our standard stock models. Sizes refer to the dimension from the centre of the bottom bracket shell to the very top of the seat tube.
(Please note, these frames are not imported via Upgrade Bikes Ltd.)
Kinesium Track Frameset.
|
|
These track frames are built from Kenesium tubing. This yield a 25% increase in strength as compared to 7005 aluminium and yields a 10% weight saving as compared with Kinesis Superlight tubing. The forks are made from carbon fibre. A 1 1/8 inch Ritchey Zero Logic Pro semi integrated headset is fitted as standard. This type of headset retains (hidden) cups for greatly enhanced serviceability. The bottom bracket height complies with the requirements of both the Manchester and Newport velodromes. Should customers wish to ride these frames on the road, recessed nut brake callipers can be fitted front and rear. The frames are available in the red, white and blue colour scheme shown. Four sizes are available (Measured from the centre of the bottom bracket to the top of the seat tube) :- 51cm (20.0 inch), 54cm (21 1/4 inch), 57cm (22 1/2 inch) & 60cm(23.5 inch). Click here to see an image of a frame built into a bike by a customer from Chicago, Illinois, U.S.A. Click here to view a bike built by us, using one of these framesets. |
For geometry, CLICK HERE. |
7005 Butted aluminium Audax Frame.
|
|
These frames are a development of our 7005 butted aluminium road frames. The wheelbase is longer and the clearances have been increased to allow easy fitment of mudguards with 700c wheels and up to 28mm tyres. The frameset is designed for use with 47/57 mm brake callipers. The forks are made from carbon fibre with an aluminium steering column. A Ritchey Zero Logic Comp semi integrated headset is fitted as standard. This type of headset retains (hidden) cups for greatly enhanced serviceability. A replaceable rear gear hanger is used. Gear lever bosses are fitted to allow the use of S.T.I./Ergo gear/brake levers, bar end shift levers or down tube shift levers. Two sets of bottle bosses are fitted. Carrier bosses are fitted to the tops of the seat stays, whilst the rear dropout has tapped holes for both mudguards and carrier. The fork ends have mudguard eyes. Permanent brake and gear cable guides/stops are all included. Four sizes are available (Measured from the centre of the bottom bracket to the top of the seat tube):- 51cm (20 inch), 54cm (21 1/4 inch),57cm (22 1/2 inch) & 60cm (23 1/2 inch). |
Carbon fibre road frameset.
|
|
These beautiful carbon fibre framesets utilise carbon fibre tubes with hydro formed lug sections. They are light yet rigid and come complete with a Cane Creek ZS2 semi integrated headset. This type of headset retains (hidden) cups for greatly enhanced serviceability. To further enhance serviceability, a removable rear gear hanger is used. Three colours are available, metallic blue, red or yellow. They are available in sizes (Measured from the centre of the bottom bracket to the top of the seat tube):- 50 cm (19.5 inch), 52 cm (20.5 inch), 54 cm (21.25 inch), 56 cm (22.0 inch), 58 cm (22.75 inch), 60 cm (23.5 inch) and 62 cm (24.5 inch).
|
7005 Hydro Formed Hard tail ATB Frame.
|
|
These are our new Hard tail A.T.B frames. Light, strong, super quality and super value with a choice of three sizes and 50 colours! This frame will accept V brakes or International mount disc brakes and comes complete with a Cane Creek Semi Integrated headset. This type of headset retains (hidden) cups for greatly enhanced serviceability. Two sets of bottle bosses are fitted as are permanent top route cable and hose guides/stops. The rear gear hanger is removable and as for all our frames, we keep them in stock! What more do you need? |
1989 Reynolds 653 Frameset.
|
|
This beautiful frameset was hand built in 1989 and saw service in the 1990 Commonwealth Games. Since then, it has covered many many miles and now benefits from a re enamel. Fashion may change but quality stands the test of time! Click on the following thumbnails, to see some of the fine detail, on this high quality frameset. Please note that this frameset is not for sale!
|
Please note – We do not recommend the use of shimmed seatpins in our frames (And their use invalidates the warranty).
Copyright © 2004 Nelson Cycles and Engineering.